Product Name:  
Product Description:  
Product Number:  
Mazda BT50/ Ford Ranger BRA  
Boost Reference Adaptor  
TS-0720-1001  
-
-----------------------------------------------------------------------------------------------------------------------  
ABOUT THIS PRODUCT  
Thank you for purchasing your new boost reference adaptor. This new product includes great features. These include:  
Very simple solution to obtaining a boost pressure reference for your vehicle.  
Durable, reversible, compact and very easy to install.  
IMPORTANT NOTES ON YOUR BOOST REFERENCE ADAPTOR  
Use only silicone hose that is the correct size and pressure rating for your application when fitting your boost reference adaptor.  
Ensure that all hoses are secured with clamps.  
The boot gauge is sold separately. The boost gauge part number is TS-0101-2023.  
RECOMMENDATIONS  
Turbosmart recommends that an accurate boost gauge be permanently fitted to the vehicle.  
Turbosmart recommends that your boost gauge is fitted by a qualified technician.  
Turbosmart recommends that your boost reference adaptor is fitted by a qualified technician.  
------------------------------------------------------------------------------------------------------------------------  
HOW TO INSTALL YOUR BOOST REFERENCE ADAPTOR  
TOOLS REQUIRED  
General mechanic tools  
BOOST REFERENE ADAPTOR INSTALLATION  
Allow the engine to cool down before installing your boost reference  
adaptor.  
Locate the factory fitted MAP sensor on the right hand side of the engine.  
Remove the MAP sensor plug.  
Loosen the screw holding the factory fitted MAP sensor in place. Ensure that  
this screw is kept in a safe place.  
Gently pull out the factory fitted MAP sensor and place in a safe location.  
1
Install the boost reference adaptor, ensuring that the O-ring is not kinked  
while you gently push the boost reference adaptor into position.  
Secure the boost reference adaptor in place by using the original factory  
supplied screw. Be careful not to over tighten the screw.  
Install the MAP sensor, ensuring that the O-ring is not kinked while you  
gently push the MAP sensor into the boost reference adaptor.  
Secure the MAP sensor in place by using the supplied bolt. Be careful not to  
over tighten the screw.  
Secure a vacuum hose onto the nipple located on the boost reference  
adaptor.  
Use hose clamps/spring clamps to secure the vacuum hose onto the nipple.  
Gently re-plug the MAP sensor.  
Turbosmart recommends that you consult a qualified auto electrician.  
Please note that these steps are required only if you are installing a  
boost gauge. Following parts are not included in this kit.  
Disconnect your battery before continuing.  
Take the cover off the fuse box located behind the battery.  
Locate pin “F49” in the fuse tray. This was a spare fuse position on our test  
vehicle. Ensure that it is a 12VDC ignition switched output on your vehicle by  
using a multimeter.  
Crimp the supplied spade connector on one end of the supplied inline fuse.  
Insert the spade connector into the fuse holder. Ensure that it is secured in  
position.  
Route your cable out of the fuse box and secure the fuse tray cover back on.  
Route the vacuum hose and the power cable into the vehicle.  
Turbosmart recommends using the grommet shown.  
Mount your boost gauge and connect the red wire to the power source  
obtained from the engine bay. Ground the black cable. Insert the vacuum  
hose on-to the boost gauge.  
2
This image shows the engine bay after the boost reference adaptor is installed. The boost reference adaptor complements the engine  
bay. It provides an easy, reversible, cost effective, compact and durable solution to obtaining a boost reference for your vehicle. Enjoy  
your new Turbosmart product. Happy motoring!  
Troubleshooting  
The following points should be checked if you are experiencing problems with your boost reference adaptor installation.  
Ensure that the boost reference adaptor is installed correctly.  
Check that the MAF sensor is correctly installed.  
Use a multimeter to check for an ignition switched 12VDC output for boost gauge illumination.  
Ensure that the O-rings are not kinked during installation.  
Follow supplied instructions to install the boost gauge.  
Any other problems, don’t hesitate to contact your local Turbosmart dealer.  
3
DO NOT USE ANY TURBOSMART PRODUCT UNTIL YOU HAVE CAREFULLY READ  
AND UNDERSTOOD THE FOLLOWING AGREEMENT.  
Please call if you have any questions or do not understand this agreement. Refer to our brochure, website or catalogue for  
terms and conditions and further information regarding your product. Turbosmart appreciates your business and pride  
ourselves on our customer service. We are always happy to offer you advice and will provide you with help in any way we can.  
The purpose of this agreement is to avoid any problems or hard feelings.  
We sometimes make mistakes, as do our dealers, distributors and suppliers. Even customers can sometimes order the wrong  
parts. Do not use, modify, install, trial assemble, nick, drop, scratch or adjust any part until you first check for any damage.  
Damage must be reported immediately. NO EXCEPTIONS. If there are any components missing please contact your  
authorised reseller immediately upon receipt of your shipment. Missing components must be reported within five (5) business  
days of receipt. Parts returned for any reason MUST BE IN RESALABLE CONDITION. It is YOUR responsibility, “THE  
CUSTOMER” to carefully package any returns to avoid shipping damage. Insurance is highly recommended. Credit cannot be  
issued for damaged goods.  
Turbosmart Pty Ltd warranties the quality of the products it designs and manufactures to be free of defects in material and  
workmanship. This limited warranty is extended only to the original purchaser and may not be transferred or assigned. This  
limited warranty applies to any product, which after careful inspection by Turbosmart Pty Ltd, after receipt of the product from  
our authorised reseller, is found to have a defect in either material or workmanship. Any modifications to the product will void  
any and all warranties and will not be exchanged. Before installation, check new car warranty. Turbosmart Pty Ltd is not  
responsible for voiding any original manufactures warranty.  
All warranty claims must be returned to the authorised reseller, you must return the product and sales receipt, at your own  
expense, accompanied by a letter stating the reason for the claim. Proof of purchase must be provided with any warranty claim  
and will be verified with the authorised reseller from which the product was purchased.  
If all the above procedures are followed, and the product is found to be defective in either workmanship or material, Turbosmart  
Pty Ltd shall either repair or replace the product, at its sole discretion, and sole cost. This limited warranty does not cover or  
apply to any personal injury, labour charges or any other incidental costs or damages caused by the defective product. The  
individual purchaser acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this  
agreement and the individual purchaser agrees to indemnify Turbosmart Pty Ltd and to hold Turbosmart Pty Ltd harmless for  
any claim related to the item of the equipment purchased. Under no circumstances will Turbosmart Pty Ltd be liable for any  
damages or expenses by reason of use or sale of any such equipment.  
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY, WHICH APPLIES TO TURBOSMART PTY LTD  
PRODUCT AS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTY EXPRESSED OR IMPLIED, INCLUDING THAT  
OF MERCHANTABILITY. ANY IMPLIED WARRANTY INCLUDING THAT OF MERCHANTABILITY AND/OR FITNESS FOR A  
PARTICCULAR PURPOSE IS HEREBY LIMITED BY THE SAME TERMS AND TIME LIMITATIONS SET FORTH IN THIS  
LIMITED EXPRESS WARRANTY AND OTHERWISE EXCLUDED.  
EXCEPT FOR THOSE OBLIGATIONS ASSUMED HEREIN, TURBOSMART PTY LTD ASSUMES NO OTHER OBLIGATIONS  
IN CONNECTION WITH THE SALE OF ITS PRODUCTS.  
IN THE EVENT THAT THE INDIVIUDAL PURCHASER DOES NOT AGREE WITH THIS AGREEMENT THE BUYER MAY  
PROMPTLY RETURN THIS PRODUCT, IN A NEW AND UN-USED CONDITION, WITH A DATED PROOF OF PURCHASE,  
TO THE PLACE OF PURCHASE WITHIN SIXTY (60) DAYS FROM THE DATE OF PURCHASE FOR A FULL REFUND.  
THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE INDIVIDUAL PURCHASER HAS READ AND  
UNDERSTOOD THIS AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS.  
Happy motoring!  
The Turbosmart Team  
Turbosmart Pty Limited P.O.Box 264 Croydon, NSW, 2132 Australia ABN: 69 081 069 794  
Tel: +(612) 9798 2866 Fax: +(612) 9798 2826 Email: instructions@turbosmart.com.au  
www.turbosmart.com.au www.turbosmartusa.com www.turbosmart.co.nz  
4